ENDURAFLEX LININGS DESCRIPTION INDEX
SOFT NATURAL RUBBER LININGS
| |
ENDURAFLEX
VE-370-WN
White, soft, natural rubber for food grade service and general purpose
chemical resistance. FDA compliant. Exhaust Steam or Pressure Cure. 30
to 40 durometer.
ENDURAFLEX
VE-411-TN
Tan, soft, pure gum natural rubber, compounded for general purpose
impingement abrasion and HCL service. FDA. 35-45 durometer.
ENDURAFLEX
VE-412-BN
Black, soft, pure gum natural rubber, compounded for general purpose
abrasion and HCL service. 40-50 durometer.
ENDURAFLEX
VE-414-RN
Red, soft, natural rubber compounded for general purpose abrasion. 40-50
durometer.
ENDURAFLEX
VE-415-TN
Tan, soft heat resistant natural rubber for high temperature and
moderate abrasion service. Exhaust Steam or Pressure Cure. This lining
material is the same as the top layer of VE333TN. 60-80 durometer.
ENDURAFLEX
VE-418-BN
Black, soft, heat resistant, natural rubber for abrasion and general
purpose chemical service. This lining material is the same as the top
layer of Hotline II. 40–55 durometer.
ENDURAFLEX
VE-512-WN
White, soft, natural rubber for good grade service and general purpose
chemical resistance. FDA. 50-60 durometer.
ENDURAFLEX
VE-514-BN
Black, soft, natural rubber for abrasion and general purpose chemical
service. 50-60 durometer.
ENDURAFLEX
VE-611-BN
Black, soft natural rubber for general purpose chemical resistance, HCL
service, and sliding abrasion. 55-65 durometer.
ENDURAFLEX
VE-616-BN
Black, soft, natural rubber with extremely high abrasion, cut, and tear
resistance for the
toughest jobs. Highest rubber physicals. FDA. 60-70 durometer.
ENDURAFLEX
CU-616-BN
Cured black, soft, natural rubber with extremely high abrasion, cut, and
tear resistance for the toughest jobs. Highest rubber physicals. FDA.
60-70 durometer.
ENDURAFLEX
VE-619-WN
White, soft, natural rubber for potable water and high purity water
service. FDA. 50-60 durometer.
ENDURAFLEX
VE-670-WN
White, soft natural rubber for food grade service and general purpose
chemical resistance. FDA compliant. Exhaust Steam or Pressure Cure. 45
to 55 durometer.
ENDURAFLEX
VE-710-BNE
Black, soft newprene lining specially to include a Biocide, Exhaust Steam or Pressure Cure
ENDURAFLEX
VE-712-BN
Black, soft natural & nitrile rubber blend for abrasion and moderate oil
resistance. 65-75 durometer.
|
|
SYNTHETIC RUBBER LININGS
|
|
NITRILE |
| |
ENDURAFLEX
VE-107-WNI
Enduraflex, White, soft, nitrile lining. FDA compliant. 50 to 60
durometer.
ENDURAFLEX
VE-515-BNI
Black. soft, nitrile lining for general purpose when petroleum oils are
present.
50-60 durometer.
ENDURAFLEX
VE-927-BNI
Black, semi-hard, nitrile synthetic lining for petroleum oil application
and general acid service. 85-100 durometer.
|
|
(EPDM) ETHYLENE PROPYLENE DIENE MONOMER
|
| |
ENDURAFLEX
VE-518-BEP
Black, soft, EPDM lining for valves and cap material for VE530BPEP.
Without tie gum. 50-60 durometer.
ENDURAFLEX
VE-530-BEP
Black, soft, EPDM lining for oxidizing solutions such as bleach and high
temperature applications. FDA. 50-60 durometer.
ENDURAFLEX
CU-535-BEP
Cured black, soft, EPDM sheeting for oxidizing solutions such as bleach
and high temperature applications and for general field and repair use.
FDA. 50-60 durometer.
cured sheeting general field and repair use
ENDURAFLEX
V-714-BEP
Black, soft, peroxide curing EPDM lining for oxidizing solutions, high
temperature applications or where sulfur cure systems may prove
detrimental. FDA. 65-75 durometer.
|
|
NEOPRENE
|
| |
ENDURAFLEX
BC-240-B
Black, soft, neoprene lining for general purpose use. 35-45 durometer.
ENDURAFLEX
VE-610-BNE
Black, soft, neoprene lining for general purpose use. Competitive grade.
55-65 durometer.
ENDURAFLEX
VE-612-BNE
Black, soft, high quality neoprene for general purpose abrasion and
chemical resistance.
55-65 durometer. A white version is available (VE-615-WNE).
ENDURAFLEX
VE-710-BNE
ENDURAFLEX Black, soft neoprene lining specially to include a Biocide. Exhaust Steam or Pressure Cure.
ENDURAFLEX
VE-713-BNE
Black, soft, neoprene lining specially designed for toughest abrasion
and cut resistance service. FDA. 60-70 durometer
ENDURAFLEX
CU-880-BNE
Black, soft, high quality pre-cured neoprene repair rubber with good compression set.
|
|
HYPALON
|
| |
ENDURAFLEX
VE-620-BH
Black, soft, Hypalon lining for high temperature and strong oxidizing
acids. 55-65 durometer. A white version is available (VE-618-WH).
ENDURAFLEX
VE-620-BHWTG
Black, soft, Hypalon lining for high temperature and strong oxidizing
acids. 55-65 durometer. A white version is available (VE-618-WH).
|
|
SBR |
| |
ENDURAFLEX
V-711-BS
Black, soft, SBR rubber for pulley lagging and sliding abrasion
applications. Pressure cure only. 60-70 durometer.
|
|
CHLOROBUTYL
|
| |
ENDURAFLEX
VE-516-BC
Black, soft, chlorobutyl lining for oxidizing solutions such a bleach
and high temperature applications. FDA. 50-60 durometer.
ENDURAFLEX
VE-524-WC
White, soft, chlorobutyl lining for reagent grade acids (especially
clear phosphoric acid) and food applications. FDA. 50-60 durometer.
ENDURAFLEX
VE-536-BC
Black, soft, chlorobutyl lining with natural rubber tie gum for
combination acid service and field application. FDA. 50-60 durometer.
ENDURAFLEX
VE-621-BC
Black, soft, chlorobutyl for general purpose chemical resistance. FDA.
55-65 durometer.
ENDURAFLEX
VE-622-BCN
Black, soft, chlorobutyl for general purpose chemical resistance. FDA.
55-65 durometer. Black, soft, top half chlorobutyl, bottom half natural
rubber for general purpose chemical services including HCL.
ENDURAFLEX
VE-625-BCN
Black, soft, top half chlorobutyl, center pure gum (PG-70) natural
rubber for HCL acid and general purpose chemical services. Available
only with Grey “Tacky Back” Tie Gum.
ENDURAFLEX
VE-641-BC
Black soft semi-hard synthetic/chlorobutyl Tri-bond for various acid
service and open top storage tanks. FDA with Tie gum. Exhaust steam or
pressure cure. 55 - 65 durometer.
ENDURAFLEX
VE-644-BC
Black, soft/semi-hard synthetic/chlorobutyl Tri-bond for various acid
service and open top storage tanks. FDA with Tacky back. 55-75 durometer.
ENDURAFLEX
VE-645-BGC
Black, soft/semi-hard graphite/100% Chlorobutyl, Tri-bond for wet
chlorine and bleach service with grey Tie gum. 55-65 durometer.
ENDURAFLEX
CU-76-BC
Cured black, chlorobutyl sheet for general field & repair use. 55-65
durometer.
|
|
SEMI-HARD LININGS |
| |
ENDURAFLEX
VE-821-BNS
Black, semi-hard, natural rubber lining for general purpose and water
treatment facilities. FDA. 70-80 durometer.
ENDURAFLEX
VE-822-BBS
Black, semi-hard, butyl synthetic lining for general chemical and high
temperature service. 80-95 durometer.
ENDURAFLEX
VE-823-WNS
White, semi-hard, natural/synthetic lining for high temperature and
general acid conditions. Cream colored when cured. FDA compliant. 80-95
durometer.
ENDURAFLEX
VE-824-WN
White, semi-hard natural lining for water and chemical treatment
service. FDA compliant. 75-90 durometer.
ENDURAFLEX
VE-9211-MNS
Semi-hard synthetic- natural blend lining for general chemical.
Complies with FDA requirements. Exhaust Steam or Pressure Cure.
ENDURAFLEX
VE-925-BNG
Black, hard, natural rubber graphite reinforced for resistance to wet
chlorine. 70 Shore D durometer.
ENDURAFLEX
VE-926-BNS
Black, semi-hard, synthetic-natural blend lining for oxidizing and
plating solutions 80-95 durometer.
ENDURAFLEX
VE-929-BN
Black, semi-hard, flexible ebonite lining with excellent physical
properties for severe corrosion service. FDA. 85-100 durometer.
|
|
TRI-BONDCONSTRUCTIONS
|
| |
ENDURAFLEX
VE-333-TN
Tan-black-tan, soft/hard/soft, 3 layer TRI-BOND combination natural
rubber for general purpose abrasion and chemical resistance in oxidizing
media and plating solutions 50-65 durometer.
ENDURAFLEX
VE-533-WN
White, soft/hard/soft, TRI-BOND natural rubber compounded for water and
acid resistance in continuous service. 50-60 durometer.
ENDURAFLEX
VE-634-BNG
Black, soft/hard/soft, 3 layer TRI-BOND . Center layer is graphite
reinforced for chlorine service. 60-75 durometer.
ENDURAFLEX
VE-636-BNS
Black, soft/hard/soft, 3 layer TRI-BOND natural, synthetic blended
rubber lining for general purpose, plating and oxidizing media. With
Tacky Back. 55-65 durometer.
ENDURAFLEX HOTLINE
Soft/hard/soft, TRI-BOND natural rubber compounded for high heat and
abrasion resistance in continuous service. 40-50 durometer.
ENDURAFLEX HOTLINE
II
Black, soft/hard/soft, 3 layer TRI-BOND natural synthetic rubber blend
lining for abrasion and high temperature, plating and oxidizing media
60-75 durometer.
ENDURAFLEX
VE-642-BGC
Black, soft/semi-hard graphite/chlorobutyl face TRI-BONDfor wet
chlorine. This lining is not good for bleach service. 55-70 durometer.
ENDURAFLEX
VE-646-BN
Black, soft/hard/soft, Tri-bond with excellent abrasion, water, heat and
weather resistance and flexibility. Excellent for scrubber module
application. 45-55 durometer.
|
|
CHEMICAL CURE LININGS
|
| |
ENDURAFLEX
C-413-TN
Tan, soft, natural rubber, chemical cure for field lining and repair for
PG-70. 30-50 durometer.
ENDURAFLEX
C-417-WN
White, soft, natural rubber, chemical cure for field lining and repair
for VE-370-WN. 30-50 durometer.
ENDURAFLEX
C-510-WN
White, soft, natural rubber, chemical cure for general purpose & field
repair. 45-65 durometer.
ENDURAFLEX
C-511-BN
Black, soft, natural rubber, chemical cure for general purpose field &
repair. 45-65 durometer.
ENDURAFLEX
C-623-BC
Black, soft, chlorobutyl, chemical cure lining for general field and
repair use. 50-70 durometer.
ENDURAFLEX
C-629-WC
White, soft, chlorobutyl, chemical cure lining for general field and
repair use. 50-70 durometer.
ENDURAFLEX
C-633-BN
Black, soft/semi-hard/soft, 3 layer TRI-BOND , natural rubber, chemical
cure for general purpose. 50-70 durometer.
ENDURAFLEX
C-643-BC
Black, soft/semi-hard/soft, chlorobutyl TRI-BOND , chemical cure
construction for chemical service, field application and weather
protection. 55-65 durometer.
ENDURAFLEX
C-922-BN
Black, semi-hard, natural rubber, chemical cure for general purpose
semi-hard rubber field repair. 75-95 durometer.
ENDURAFLEX C-924
BNG
Black, semi-hard, natural rubber, chemical cure, graphite reinforced
lining for wet chlorine service field repair. 75-95 durometer.
|
|
