Endurabond™ > Tank Lining Primers & Cements
Tank Lining Primers & Cements
CIM 61BG Epoxy Primer is a two component high solids epoxy coating
formulated as a primer for porous and non-porous surfaces such as
concrete and metal.
Endurabond™ 103 is a solvent based white natural rubber tack cement for bonding white natural rubber tank linings. All ingredients in the cement stock meet FDA requirements. For best results, it shall be used with Endurabond™ Primer #1 and Endurabond™ Intermediate #2 vulcanizing primers.
Endurabond™ 103, with appropriate primers, is suitable for pressure and open steam curing of Enduraflex™ tank linings having a natural tie gum.
Endurabond™ 201 is a solvent based neoprene rubber tack cement for bonding neoprene rubber tank linings. For best results, it shall be used with Endurabond™ P-100 and Endurabond™ I-100 based vulcanizing primers.
Endurabond™ 202 is a solvent based neoprene rubber tack cement for bonding neoprene rubber tank linings. For best results, it shall be used with Endurabond™ Primer P-100 and Endurabond™ Intermediate I-100 based vulcanizing primers.
Endurabond™ 202, with appropriate primers, is suitable for open steam curing of Enduraflex™ neoprene tank linings.
Endurabond™ 500 is a solvent based tack cement for bonding
chlorobutyl rubber tank linings. For best results, it shall be used with
Endurabond™ Primer P-100 and Endurabond™ Intermediate I-100
based vulcanizing primers.
Endurabond™ Intermediate #2 is a red overcoat used with Primer #1.
This cement system is suitable for pressure, chemical or open steam
curing of tank linings.
Endurabond™ Intermediate I-100 is a black overcoat used with Primer
P-100 for synthetic rubber linings.
Endurabond™ Primer # 1 is a green primer for use on various metal
substrates which when used in conjunction with Intermediate #2 cover coat, provides excellent natural rubber to metal adhesion with #3 Tack cement.
This cement system is suitable for pressure, chemical or open steam
curing of tank linings.
Endurabond™ Primer P-100 is a grey primer for use on various metal
substrates which when used in conjunction with Intermediate I-100 cover coat, provides excellent synthetic rubber to metal adhesion with the appropriate tack cement.
Endurabond™ Tack #3 is a black cement used over Primer #1 and
Intermediate #2 for bonding natural rubber. Tack #3 provides excellent
green strength. It is suitable for use with autoclave, open steam and
chemical cure systems.
Endurabond™ 600 is a solvent based EPDM rubber tack cement for bonding EPDM rubber tank linings. For best results, it shall be used with Endurabond Primer P-100 and Endurabond Intermediate I-100 based vulcanizing primers.
Blair Rubber Company • 5020 Panther Parkway • Seville, Ohio 44273
Ph. 330-769-5583 • Toll Free 800-321-5583 • Fx. 330-769-9334
Email: sales@blairrubber.com • technical@blairrubber.com
